POLYURETHANE

ALIPHATIC POLYURETHANE FLOOR COATING (GLOSSY/MATT) - (METCON MCC - 2921)

PRODUCT DESCRIPTION

MCC 2921 is an Aliphatic Polyurethane based floor coating aliphatic for application by roller. The product is desired of exterior application and provides excellent adhesion over primed or screeded surface. The coating provides a monolithic smooth surface and can be cleaned with cleaning solution and detergent. The coating also exhibits excellent chemicals and abrasion resistance good resistance to U. V. rays.

RECOMMENDED USAGE

MCC 2921 is used as a hard--top coat where high abrasion resistance is required. It is recommended for light to medium engineering Industries, Auto showroom, parking areas. The coating is ideally used as maintenance top coat over exiting flooring systems.

DIRECTIONS FOR USE

The surface to be coated should be clean dry and free of surface imperfection. Mix the base and hardener in the recommended ratio, stir thoroughly for 2- 5 minutes. Apply by roller/brush. Allow to cure for 3 - 4 hrs before applying the second coat. Allow the second coat to cure for 24hrs before allowing any movement.

TECHNICAL SPECIFICATIONS

1. Type : Aliphatic Acrylic Urethane
2. Mixing ratio (B:H) : 1 : 1 by volume
3. Volume solids : 60 - 63%
4. Colour : Any standard shade
5. Finish : Glossy/matt
6. Flash point : Above 30oc
7. Recommended Thinner : Polyurethane thinner
8. Surface dry @ 30oC : 1hr.
9. Tack free dry @ 30oC : 3 - 4 hrs
10. Hard dry @ 30oC : 24 hrs.
11. Pot life @ 30oC : 2 hrs
12. Theoretical coverage : 5 Sq.mtr per ltr at 100 microns
13. Application method : Brush/roller
14. Shelf life : 6 months in un opened container
15. Clean Up : It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
16. Safety Precautions : This product is intended for use only by professional applicator. Use of personal protective equipment and adequate local exhaust ventilation is recommended during application.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure