Metcon MCC 1126 is a single pack, Air drying primer, specially formulated for polypropylene plastic surfaces. It offers an excellent intercoat adhesion forming an efficient tie-coat between the bare plastic substrate and finish coat based on polyurethane.
MCC – 1126 is recommended for polypropylene plastic substrates in plastic industries.
Wipe & clean the polypropylene surface with Solvent to remove dust and other impurity. Apply by spraying (with conventional air assisted gun) at lower pressure and with proper flow regulation to give the DFT of 5 – 6 microns exactly. Proper care should be taken to control DFT within the specified range.
Type | : | Polypropylene resin based |
Shade | : | Clear lacquer and Grey shade |
Gloss | : | Matt |
%NVM | : | 5 – 10% |
Recommended DFT | : | 5 - 6 Microns (should not be more) |
Theoretical Coverage | : | 8 - 10 Sq. mtrs per ltr |
Thinner | : | Special MCC thinner |
Application method | : | Spraying |
Drying Schedule | : | Surface Dry : 10 – 15 mins. Tack free dry : 20 – 30 mins Hard dry : Overnight |
Overcoating Period | : | After O/N Air drying : PU FINISH PAINT |
Shelf Life | : | 6 Months in sealed drums |
Packing | : | Minimum 20 Litre Pack |
Clean Up | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
Safety Precautions | : | This product is intended for use only by professional applicator. Use of personal protective equipments and adequate local exhaust ventilation is recommended during application. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd