Metcon MCC – 2710 is a two-component polyamide cured coal tar and epoxy blend system providing excellent resistance to seawater, fuel oil and also to the spillage of minerals, dilutes acids and aromatic hydrocarbon solvents and excellent adhesion to the bare metal and treated surface.
MCC – 2710 is used as a lining for MS / Concrete tanks for sewerage equipment, waste water disposal systems and also used for the protection of chemical, troughs under ground pipes, tanks, aerators, Pumps etc.
The substrate to be painted are necessary to get thoroughly cleaned for all sorts of dirt and contamination. Both parts are to be mixed in the given ratio and to be applied by brush or airless spray at around 80 - 100 microns. In general one coat is sufficient.
Colour | : | Black |
Finish | : | Semiglossy |
Volume Solids | : | 45 ± 3% |
Mixing Ratio | : | Base : Hardner : : 4 : 1 ( By Volume) |
Thinner | : | Epoxy thinner |
Maturation Period | : | 15 - 20 Minutes |
Application Method | : | Brush or Airless spray |
Drying Time at 30oC | : | Surface dry: 2 - 3 Hrs. Tack free : 5 Hrs. Hard dry : overnight |
Recommended DFT | : | 80 – 100 microns |
Theoretical Coverage | : | 10 Sq.mtr per ltr at 80 microns |
Recoatability | : | 16 - 18 Hrs. |
Pot life at 30oC | : | 1 - 2 Hrs |
Shelf Life | : | One year in separately sealed drums |
Packing | : | 20 litres dual pack |
Clean Up | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
Safety Precautions | : | This product is intended for use only by professional applicators. Use of personal protective equipment and adequate ventilation is recommended during application. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd