WATER BASED

WATERBASED PUD TOP COAT - (METCON MCC - 5115)

PRODUCT DESCRIPTION

MCC 5115 is a finish coating for walls requiring a high degree of dirt repellence, washability and superior resistance to bio-organism based on water based PUD. It can be used for interior and exterior use.
MCC 5115 is fast curing , tough ,flexible , better scratch resistance properties . Resistance to oil stains & common house hold things. It can be specially designed for pharma industries.

RECOMMENDED USAGE

Metcon MCC 5115 is applicable over prepared and primed surfaces. The coating fulfils 100% low VOC compliance required for clean room applications. The wall coat is also ideally suited for laboratories, pharma and house hold applications.

DIRECTIONS FOR USE

Metcon MCC 5115 Wall coat is applicable by brush/roller . 2nd coat may be applied after overnight dry.
2 coats are recommended for abrasion resistant and durable finish. Ensure that masonary surfaces are adequately finished in plumb and level. Crevices and cracks should be sealed with Polycem MCC 1240 Polymer and cement sealer and sanded properly. Acrylic wall putty or spray plaster may be applied in 1 or 2 layer as may be required for uniform appearance for interior finish.The ready surface should be primed using Metcon MCC 5101 tough coat primer. For best results do not excessively thin the paint.
Clean the spray equipment with water immediately after use. This will prevent clogging of nozzles.

TECHNICAL SPECIFICATIONS

Surface Dry : 30 minutes
Re-coatability : 10 -12 hours
Thinning : by plain water 5 – 10% to adjust consistency for spray coating.
Finish : Semi-glossy or Matt
Shelf Life : 1 year in sealed HDPE cans
Packing : 10 ltr / 20 ltr HDPE cans
√ Humidity Resistance   √ Impact Resistant
√ Water Resistant   √ Elongation of Dry Film
√ Resists Freeze Thaw   √ Very good tensile Strength
√ Excellent Surface Hardness   √ Solvent Resistant
√ Excellent Abrasion Resistance   √ Excellent Adhesion

SAFETY PRECAUTIONS

  • Care should be taken during usage and storage to avoid splashes and contact with eyes, mouth, skin & food stuffs.
  • Treat splashes to eyes & skin immediately with fresh flowing water. If swallowed, seek medical help immediately.
  • Use protective eye goggles, hand gloves and dust/ vapour masks while using the product
  • Use adequate ventilation while using the coatings. Appropriate spray booth enclosure should be provided for spray finish.
  • Provide dust-resistant environment for Polyurethane coatings.


Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure