QUICK DRYING

FAST DRYING PRIMER SURFACER - (METCON MCC - 1182)

PRODUCT DESCRIPTION

Metcon MCC – 1182 is a fast drying primer surfacer has been widely used in the vehicle refinishing field as well as original equipment manufacturers as it has fast drying properties and it exhibits very good adhesion and corrosion resistance, superior chemical properties on metal substrate.

RECOMMENDED USAGE

MCC – 1182 is used as a fast drying surfacer in the Automobile field and very fast drying original equipments, industrial finishes, construction steelworks etc. It can be top coated with Synthetic enamel or Fast drying topcoat.

DIRECTIONS FOR USE

Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Add recommended thinner to adjust application viscosity and apply with brush or spray.

TECHNICAL SPECIFICATIONS

1. TYPE : Fast drying resin
2. COLOUR : Grey, Red oxide
3. FINISH : Eggshell / Matt
4. VOLUME SOLIDS : 35 ± 5 %
5. THINNER : Special Thinner
6. FLASH POINT : > 35oC
7. APPLICATION METHOD : Brush, spray or Dipping
8. DRYING TIME at 30oC : Surface dry : 15 – 20 Minutes
Tack free dry : 30 – 40 Minutes
Hard dry : Overnight
9. RECOMMENDED DFT : 30 - 40 Microns
10. THEORETICAL COVERAGE : 10 Sq.mtrs per ltr at 35 microns
11. RECOATABILITY : 16 – 24 hrs
12. PACKING : 20 Litres single pack
13. SHELF LIFE : One year in sealed drums
14. CLEAN UP : It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays
15. SAFETY INFORMATION : Always paint with small quantity and replace lid after use. Use safety precautions regarding flammability of solvents & paint.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure