EPOXY

EPOXY ZINC RICH PRIMER - (METCON MCC - 1109 )

PRODUCT DESCRIPTION

Metcon MCC - 1109 is a two-component, polyamide cured epoxy primer enriched with metallic zinc as an effective corrosion inhibiting pigment. It provides excellent corrosion resistance and excellent adhesion to bare metal. It cures to hard wearing and highly weather-resistant coating.

RECOMMENDED USAGE

MCC – 1109 is used as a versatile, long-life primer on steel in moderate to severe corrosive environment. It is also recommended for under water structures. It is used for protection of blast cleaned steel during storage, fabrication and construction.

DIRECTIONS FOR USE

Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Mix base and hardener in the ratio. Allow it to maturate and apply with brush or spray.

TECHNICAL SPECIFICATIONS

Colour : Metal grey
Finish : Matt
Volume Solids : 50 ± 2%
Mixing Ratio : 4 Parts of Base to 1 Part Hardner ( By Volume)
Thinner : Epoxy thinner
Maturation Period : 15 - 20 Minutes
Application Method : Brush or Airless spray
Drying Time : Surface dry : 20 – 30 mins.
Tack free : 2 – 3 hrs
Hard dry : Overnight
Recommended DFT : 50 – 60 Microns
Theoretical Coverage : 10 Sq.mtrs/ ltr at 50 microns DFT
Recoatability : 16 – 18 Hrs.
Pot life : 2 – 3 Hrs
Shelf Life : One year in separately sealed drums
Packing : 20 Litre Dual Pack
Clean Up : It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
Safety Precautions : This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure