Metcon MCC - 1171 is a single pack air - drying zinc phosphate primer used as an undercoat for Synthetic Enamel system.
MCC – 1171 is used as a general purpose primer in corrosive atmospheric conditions. It is a suitable primer for topcoats based on alkyd systems.
Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Add recommended thinner to adjust application viscosity and apply with brush or spray.
1. TYPE | : | Synthetic resin based |
2. SHADE | : | Grey / White / Yellow Grey/Red oxide |
3. FINISH | : | Matt |
4. VOLUME SOLIDS | : | 40 ± 5 % |
5. RECOMMENDED THINNER | : | Synthetic thinner |
6. FLASH POINT | : | > 35oC |
7. APPLICATION METHOD | : | Brush or Conventional or Airless spray |
8. DRYING TIME | : | Surface dry : 30 – 40 minutes Tack free dry : 3 – 5 hrs Hard dry : Overnight |
8. DRYING TIME | : | Surface dry : 30 – 40 minutes Tack free dry : 3 – 4 hrs Hard dry : Overnight |
9. RECOMMENDED DFT | : | 30 - 40 Microns |
10. THEORETICAL COVERAGE | : | 10 sq.mtrs/ltr at 30 microns |
11. RECOATABILITY | : | 16 – 24 hrs |
12. PACKING | : | 20 Litres single pack |
13. SHELF LIFE | : | One year in separately sealed drums |
14. CLEAN UP | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
15. SAFETY PRECAUTIONS | : | Always paint with small quantity and replace lid after use. Use safety precautions regarding flammability of solvents & paint. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd