Metcon MCC 1110 is a two - component zinc phosphate based epoxy oil resistant primer with excellent corrosion resistance and adhesion to the bare metal and treated surface. It is a suitable primer for almost all the topcoats including Polyurethane, Epoxy, Vinyl, Acrylic, Synthetic & Fast Drying Finish Paint, etc. It has excellent adhesion over galvanized steel. After complete curing it gives a tough film which provides a long term protection against mild atmospheric conditions. It is resistant to Hydraulic oil and Transformer oil.


It is used as an oil resistant primer for internal of transformer tanks /oil storage tanks/ drums etc. It is also used as tough coat on bottom frames of transformers.


Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Mix base and hardener in the ratio. Allow it to maturate and apply with brush or spray.


Colour : White / Light Biscuit
Finish : Eggshell to Matt
Volume Solids : 45 ± 2%
Mixing Ratio : 4 Parts of Base to 1 Part Hardener (By Volume)
Recommended Thinner : Epoxy thinner
Maturation Period : 15 - 20 Minutes
Application Method : Brush or Conventional spray
Drying Time at 30°C : Surface Dry : 20 – 30 mins
Hard dry : 2 - 4 Hrs
Recommended DFT : 35 - 45 Microns
Theoretical Coverage for primer coat : 10 Sq. Mtrs. / Ltr. At 45 microns DFT
Pot life at 30°C : 4 – 6 hrs
Shelf Life : One year in separately sealed containers
Packing : 25 Litre Dual Pack
Clean Up : It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays.
Safety Precautions : This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure