Metcon MCC 2908 is an Aliphatic two-component Polyurethane coating specially formulated for exterior coating with lead free pigments where high chemical resistance, aesthetic appearance along with excellent gloss retention properties is desired. This fast drying coating offers excellent mechanical properties like mar & rub resistance, flexibility, impact resistance, excellent UV resistance, adhesion and scratch hardness. It offers an excellent resistance to industrial heavy chemicals, acids, alkalies, air borne pollutants, saline water etc. It is suggested to apply on Epoxy Zinc Phosphate based or polyurethane based primer-coated surface.


Metcon MCC 2908 is recommended for new equipments, machineries, Automotive coatings, Railway carriages and maintenance of plant steel structures exposed to heavy chemical and corrosive atmospheric conditions in Industrial, and Marine environment.


Remove all oil and grease from surfaces using Metcon Special Cleaning Solvent. Remove rust by sanding with emery No 80 or 120. Clean the surface thoroughly before blasting. Ensure blasting is Sa 2.5 profile. Remove loose particles by blown air. Do not expose blasted surface for long period before painting. Proper cleaning of the metal surface will enhance the life of the coating. Clean & wipe the surface to get free from dust, rust scale, loose particles and grease.


1. Type : Acrylic Polyurethane
2. Shade : Any std shade
3. Finish : Smooth and uniform
4. Gloss : Glossy / Semi Glossy
5. Recommended Dry Film Thickness : 40 - 50 microns
6. Theoretical spreading rate, min : 10 Sq m/ltr at 50 micron DFT
7. Volume solids : 50 ± 2 %
8. Mixing Ratio (B:H) : 4 : 1 by volume
9. Maturation Period : 15 – 20 mins
10. Drying Time at 30oC : Surface dry : 10 -20 mins
Tack Free dry: 3 hrs
Hard dry : overnight
Stoving at 80oC for 30 minutes with 15 mins flash-off time
11. Flash point : Component A & B : > 28oC
12. Pot life at 30oC : 3 - 4 hrs
13. Clean Up : Polyurethane Thinner
14. Packing : 20 litres dual pack
15. Shelf Life : 12 months in closed containers
16. Safety Precautions : This product is intended for use only by professional applicators in accordance with guidelines given in MSDS. Use of personal protective equipment and adequate ventilation is recommended during application. All used material & empty containers should be disposed off in accordance with appropriate regional regulations.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure