Whats New



Metcon MCC - 2720 is a two-component polyamide cured structured epoxy finish coating, forming a tough, hardwearing coating which provides an excellent resistance to industrial chemicals, water & petroleum products. It gives 100% adhesion to bare metals alongwith required texture in single application.


MCC – 2720 is used for long-term protection of steel and other structural materials in severely corrosive environment like Marine Atmosphere, Chemical Plants, Oil Refineries, Fertilizer Plant and Paper Industry.


Before application of MCC 2720, the surface to be painted should be properly cleaned and pretreated with respect to removing of grease, oil, loose scale or any other contaminant. This top coat can be applied on any primer or surface. MCC – 2720 is applied at 40 – 60 psi on primed surface in two cross coats. While application see that the primer coat is covered properly. While application texture pattern automatically appears on the painted surface. After complete curing the film shows excellent tough and textured finish.


Shade : All standard shades
Finish : Glossy, S/G, Eggshell & matt with texture.
Volume Solids : 45 ± 3 %
Mixing Ratio : 4 Parts of Base to 1 Part Hardener (By Volume)
Recommended Thinner : Epoxy thinner
Maturation Period : 15 - 20 Minutes
Application method : Brush or Conventional / Airless spraying
Drying time at 30oC : Surface dry : 30 – 40 mins
Tack Free Dry : 3 - 4 hrs
Hard dry : Overnight
Recommended DFT : 50 - 70 Microns
Theoretical Coverage : 9 Sq mtr/ ltr at 50 microns DFT
Recoatability : 16 - 18 Hrs.( If desired )
(But should not be more than 7 days)
Pot Life at 30oC : 3 - 4 Hrs
Shelf Life : One year in separately sealed drums
Packing : 20 Litres Dual Pack
Clean Up : It is good working practice to periodically flush out spray equipment during the course of the working day.
Safety Precautions : This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application.