MCC – 1106 is a two-component zinc chrome based epoxy primer with excellent corrosion and chemical resistance. It gives 100% adhesion to the bare metal or treated surface. It is a suitable primer for almost all topcoats including polyurethane, epoxy, vinyl, acrylic, synthetic etc.
MCC – 1106 is used as an ideal primer in moderate to severely corrosive marine & industrial atmospheric conditions.
Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Mix base and hardener in the ratio. Allow it to maturate and apply with brush or spray.
Shade | : | Yellow |
Finish | : | Eggshell to matt |
Volume Solids | : | 40 ± 3% |
Mixing Ratio | : | 4 Parts of Base to 1 Part Hardner ( By Volume) |
Thinner | : | Epoxy thinner |
Maturation Period | : | 10 - 15 Minutes |
Application Method | : | Brush or Air Assisted or Airless spray |
Drying Time | : | Surface dry : 15 – 20 minutes Tack free dry : 1 – 2 hrs Hard dry : Overnight |
Recommended DFT | : | 35 – 45 Microns |
Recoatability | : | 16 – 18 Hrs |
Theoretical Coverage | : | 10 sq mtr/ltr @ 40 microns dft |
Pot life | : | 4 – 6 Hrs |
Shelf Life | : | One year in separately sealed drums |
Packing | : | 20 Litre Dual Pack |
Clean Up | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
Safety Precautions | : | This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd