Metcon MCC 1231 is a water based rust converter with non-pigmented high-quality rust preventive primer. Rust Converter Cum Primer is designed to be applied directly to rusty surfaces or poorly prepared steel surfaces. Rust Convertor cum primer reacts with iron oxide converting it into a barrier layer of black non-rusting composition. Generally, all types of paint namely Alkyds, CR, Acrylics, Epoxies, PU may be applied over this primer.
MCC – 1231 is used as an ideal Pretreatment chemical for the all-ferrous, mild steel based substrates. It is recommended for use on rusted or partially rusted surfaces & to convert existing rust into a stable protective coating & to prevent future rusting.
Remove all salt, loose rust, dirt, mill scale, grease, oil etc. Apply solvent cleaner according to the manufacturers directions & rinse. A residue free surface without any loose rust is essential before coating. Application can be by Brush / Spray / or Roller.
Apply first coat of rust convertor over clean substrate 10 - 15 microns. A black layer appears over the surface to show rust convertor has started functioning. Apply second coat when first coat still tacky. Top coats can be applied 24 Hrs after the application of rust converter.
Rust converter should not come in direct contact with food & water. Refer MSDS for further information. Do not use acetone or dishwashing detergent to clean rusted steel surface
Approximately 10 sq. mt /litre at 10 - 15 microns. The actual surface condition & intensity of rust determine the actual coverage.
Shelf life of the product is 1 year if stored in a plastic tightly sealed container in cool & dry place.
Avoid splashing of liquid on eyes and part of body. Use Rubber /PVC Hand gloves. Any spillage should be cleaned with water followed by soap wash. Close the container immediately after the use.
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd