Metcon MCC – 1141 is a fast drying primer exhibiting a high degree of impermeability to water and water vapors, thereby showing corrosion resistance in moderate to severe corrosive atmospheric conditions. It also provides an excellent hardness, elasticity, and resistance to mild acids and alkalis, weathering and salt water.
MCC – 1141 is used as a primer for M.S. structures in moderate to severe corrosive atmospheric conditions where water resistance is also required. It is recommended for use in Paper industries, Textile industries, Distilleries, pharmaceutical companies, fertilizer plants and construction steelworks.
Ensure that the surface is oil and grease free clean and dry. Rust is to be removed or Rust convertor may be applied as a protective measure. Add recommended thinner to adjust application viscosity and apply with brush or spray.
1. TYPE | : | Acrylated resin based |
2. SHADE | : | Red oxide |
3. FINISH | : | Eggshell / Matt |
4. VOLUME SOLIDS | : | 40 ± 5 % |
5. RECOMMENDED DFT | : | 30 - 40 Microns |
6. THEORETICAL COVERAGE | : | 10 Sq.mtr. at 40 microns DFT |
7. RECOMMENDED THINNER | : | Acrylic Thinner |
8. FLASH POINT | : | > 35oC |
9. APPLICATION METHOD | : | Brush or spray or Dipping |
10. OVERCOATING INTERVAL | : | 16 – 24 hrs |
11. DRYING TIME at 30oC | : | Surface dry : 5 – 10 Minutes Tack free dry : 15 – 20 Minutes Hard dry : Overnight |
12. PACKING | : | 20 Litres single pack |
13. SHELF LIFE | : | One year in sealed drums |
14. CLEAN UP | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
15. SAFETY PRECAUTIONS | : | Both polymer and thinner are rapid drying type. Always paint with small qty and replace lid after use. Use safety precautions regarding Flammability of Solvents & Paints. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd