MCC - 2700 is a two-component polyamide cured epoxy finish coating, forming a tough, hardwearing coating which provides an excellent resistance to industrial chemicals, water & petroleum products. It gives 100% adhesion to bare metals as well as treated surfaces.
MCC – 2700 is used for long-term protection of steel and other structural materials in severely corrosive environment like Marine Atmosphere, Chemical Plants, Oil Refineries, Fertilizer Plant and Paper Industry.
MCC – 2700 is recommended to apply on an Epoxy Zinc Phosphate Primer coated surface. A perfectly clean surface free from any contamination and primed afterwards with Epoxy primer is necessary to get the expected parameters of the top coat.
Shade | : | All standard shades |
Finish | : | Glossy, S/G, Eggshell & matt |
Volume Solids | : | 45 ± 3% |
Mixing Ratio | : | 4 Parts of Base to 1 Part Hardener (By Volume) |
Recommended Thinner | : | Epoxy thinner MCC 60002710 |
Maturation Period | : | 15 - 20 Minutes |
Application Method | : | Brush or Conventional / Airless spraying |
Drying Time at 30oC | : | Surface dry : 30 – 40 mins Tack Free Dry : 4 - 5 hrs Hard dry : Overnight |
Recommended DFT | : | 40 - 50 Microns |
Theoretical Coverage | : | 10 Sq mtr/ ltr at 40 microns DFT |
Recoatability | : | 16 - 18 Hrs. |
Pot life at 30oC | : | 3 - 4 Hrs |
Shelf Life | : | One year in separately sealed drums |
Packing | : | 20 litres dual pack |
Clean Up | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
Safety Precautions | : | This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd