MCC 1113 is a two-component, air drying primer based on Zinc Chrome and Polyvinyl Butyral Resin. It gives excellent adhesion on non ferrous metal like aluminum, tin, galvanized iron. It can be top coated with Polyurethane, Epoxy, Chlorinated Rubber, Acrylic based primers & finishes.
MCC 1113 is used as a pretreatment primer for mild steel, galvanized iron and aluminium. It is ideal for vehicle chassis, underbody components, security gates and wrought iron parts.
All surfaces must be dry and clean free from oil and grease. The rust and old paint should be removed with rust remover or by sanding. For Galvanized steel a special cleaner is to be used. After all necessary cleaning the surfaces should be rinsed thoroughly with fresh water and allowed to dry. Both the base and hardener are mixed in the given ratio, and a thin coat is to be applied with brush or spray. If necessary to achieve recommended DFT second coat may be applied. For overcoating Nitrocellulose based coatings are not recommended.
| Shade | : | Greenish Yellow |
| Finish | : | Matt |
| Volume Solids | : | 10 ± 2% |
| Mixing Ratio | : | 1 Parts of Base to 1 Part Hardener (By Volume) |
| Thinner | : | Special Etch thinner |
| Maturation Period | : | 5 - 10 Minutes |
| Application Method | : | Brush or Conventional spray |
| Drying Time | : | Surface dry : 5 - 10 mins Tack free dry : 15 – 20 mins Hard dry : 3 – 4 hrs |
| Recommended DFT | : | 8 - 10 Microns |
| Theoretical Coverage | : | 12 Sq. Mtr /Ltr at 10 microns DFT |
| Recoatability | : | 4 hrs |
| Pot life at 30oC | : | 1 - 2 hrs |
| Shelf Life | : | One year in separately sealed drums |
| Packing | : | 20 Litre Dual Pack |
| Clean Up | : | It is good working practice to periodically flush out spray equipment during the course of the working day. Frequency of cleaning will depend upon amount sprayed, temperature and elapsed time, including any delays. |
| Safety Precautions | : | This product is intended for use only by professional applicator. Use of personal protective equipment and adequate ventilation is recommended during application. |
2017 © Metcon Coatings & Chemicals India Private Limited. Designed by Infotronics Integrators (I) Pvt. Ltd