Epoxies

EPOXY - PU SL FLOOR COATING (MEPOTHANE SL 3716)

PRODUCT DESCRIPTION

Mepothane SL 3716 is a 4 component selfleveling system based on hybrid Epoxy PU system with a special grade of amine hardner. The system is supplied in pre-weighed packs ready to mix and use. The system consists of base, hardner & premixed mineral aggregates.

PRODUCT ADVANTAGES

Mepothane SL 3716 provides a seamless washable hygiene floor top coat with excellent aesthetic appeal and gloss. The product has excellent adhesion to primed and screeded substrates with very good self-leveling properties. It also provides a dense abrasion resistant, oil, water and chemical resistant floor top coating with excellent flexibility.

APPPLICATON AREAS

Ideal as top coat for clean room in pharmaceuticals, electronic assembly units, hospitals, flight kitchens, food processing units, Engineering units, breweries etc.

PRODUCT APPLICATION

  • Surface preparation: The substrate should be free from moisture, loose particles, dust, oil & grease. It is recommended self leveling coating over a properly primed base coat or epoxy screed. The primed surface should be allowed to cure for atleast 5-6 hrs before application of top coat.
  • Mix Resin and hardner in the given ratio. Add pigment paste and filler & stir the mixture thoroughly using an electronically driven motor.
  • Lay the mixture to the desired thickness
  • Deareate by using spike rollers.
  • Allow to cure for a minimum 48 hrs before any traffic movement.

CONSUMPTION

One pack contains -

Resin : 4.60 Kgs
Hardner : 2.00 Kgs
Pigment Paste : 0.4 Kg
Filler : 8.0 Kgs

TYPICAL PHYSICAL PROPERTIES

Type : Epoxy – PU Hybrid system.
Mixing Ratio : Pre weighed packs
Pot Life : 30-45 min
Surface Dry : 2 -3 hrs
Tack Free Dry : 8 hrs
Hard Dry : Overnight
Solvent : ---
Clean up : Epoxy thinner MCC 60002710
Shelf Life : 12 months

Qty Required For 1 Sq.Mtr - 1.70 KG

STORE AND HANDLING

The product should be stored in accordance with national regulations.

It should be kept in a cool, well ventilated area, away form heat, direct sunlight, sparks and children.

Handling :
  • Handle with care. It contains inflammable solvents. Mix resin and hardner as per the ratio
  • Use the mix solution within the pot life time.
Health & Safety :
  • Please refer to MSDS
  • Observe reasonable care and employ ordinary hygienic principles such as washing the hands with soap and water before eating or smoking.
  • It is recommended to wear gloves, goggles and nose masks while application.

FIRST AID

Skin Contamination :
  • Dampen the cloth with Epoxy Thinner and wipe the hands with the cloth.
  • Wash with water and then with soap and water
  • Dried film is non-toxic
Exposure to continuous vapours :
  • The applicator should be moved to get fresh air.
Swallowing :
  • Treat as for irritant material, vomiting should be induced.

Acrylic Epoxies Polyurethanes Quick Drying Synthetic Enamels Waterbased Others
Download Brochure